Laboratory Chiller- Laser Chillers-
Laboratory Chillers- Laser Chiller- Liquid Chiller- Lab Chiller |
|
Chillers
for Many Applications Including:
Laboratory Chillers for Liquids
Laser Chiller
Medical & Biopharmaceutical Chillers
Military & Defense Applications
Semiconductor Chillers |
|
|
Solid State Cooling Chillers offer a thermoelectric
module solution for a wide array of chiller applications. Using the
thermoelectric principles developed discovered in 1834 by Peltier,
thermoelectric cooling systems are found today in many devices in homes,
laboratories, space and medical facilites. One common use of
thermoelectric devices is in heating seats in automobiles.
Why Choose a
thermoelectric chiller over a refrigerant based mechanical chiller?
-
Only moving parts
are the pump and cooling fan

Refrigerant based chillers have
reciprocating compressors. A thermoelectric device uses dissimilar
ceramics. When DC power is applied, electrons move from one side to the
other side of the device. These electrons heat the one side while the
other side is cooled by the electrons being drawn away. Thus are no
moving parts to create the cold, thus maintenance is lower for the
thermoelectric device. Perfect for Lab chiller environments
Thermoelectric modules are powered by a
variable voltage power supply that provides the minimum power required
to control the temperature at set point, so ThermoCube only draws as
much power as needed.
Most refrigerant gas is considered ozone
depleting if released into the atmosphere.
Because electrons transfer the heat,
Thermocube responds instantaneously to changes in load. The digital PID
temperature controller holds to < + 0.05 °C, even near ambient.
With only two moving parts, the pump and
cooling fan, ThermoCube is quiet. Available with four fan options and
sound-dampening insulation, the quietest model runs at 49 dBA.
(Liquid-cooled ThermoCubes have no fan.)
|
|
Chiller Products |
|
|
Thermocube
Models to 600W Cooling |
Oasis
Ultra-compact chiller to 150W
Cooling |
|
 |
 |
|
Compact Size
Precise Temperature Control, Even Near Ambient
For use w/ Fluorintert, Glycol Solutions, PAO or Water
Very Energy Efficient,
Whisper-Quiet
Precise temperature control (+0.05
°C) throughout
|
Ultra-compact and precise
6.5 lbs. in weight
Precise 10-45°C Setpoint with +/-
0.1°C Control
Uses less 100W of 12VDC Power
|
|
Models |
|
|
Thermocube 200-
Product
Literature
Thermocube 300-
Product Literature
Thermocube 400
Product Literature
Thermocube 300A
Product Literature
Thermocube 400AC
Product Literature
Thermocube 400L
Product
Literature
Thermocube 600L
Product Literature
Thermocube PAO
Product Literature
|
Oasis
™150
Product Literature |
|
Thermocube
Specifications, Cooling
Capacity Curves, etc. |
Oasis
Specifications, Cooling
Capacity Curves, etc. |
|
ThermoCube Air-Cooled Liquid
Recirculating Chiller in 200, 300 or 400 W Capacities
for laboratory,
laser,
analytical,
and other applications with modest heat loads
Examples of Current Customer
Applications
low light CCD camera
laser hair removal
laser tatoo removal
scanning electron microscopes
|
Oasis Provides 150W of Chiller Capacity
Examples of Current Customer Applications
low light CCD camera
diode lasers
medical equipment
laboratory equipment |
Some typical equipment which is temperature controlled by the
ThermoCube chillers:
Lasers, analytical equipment, drug testing, scanning electron
microscopes, low-light CCD cameras, small turbo or diffusion pumps,
solar/flat panel displays, drones, inflight and military systems. |
|
aa |
Top of Page | Home Page |
Vacuum Equipment |
Pumps |